Video (12 min) Process Lifetime Prediction with DSC and Kinetics Neo (Thomas Haenel, NETZSCH).
Application Epoxy Resin: The Curing Kinetics of an Epoxy-Based Adhesive. Simulation for Reliable Predictions and Process Optimization.
Application Epoxy Resin — Curing, Partial Diffusion Control.
Video of NETZSCH Webinar (57 min): "How Kinetic Simulation Can Improve Your Thermosetting Curing Process".
Lecture (German): "Kinetische Analyse, Modellierung und Vorhersage für Aushärtereaktionen in der Kinetics Neo Software" . It is made on the Thermal Analysis Expert Meeting of Fiber Reinforced Plastics Group (AVK) in Frankfurt.
Flyer: "Curing Measured by DSC and DEA and analyzed by Kinetics Neo" for exhibition Composites Europe 2017.
PowerPoint visual show "Do You Understand Curing?" of Kinetics Analysis of Curing Examples DSC and DEA (Microsoft PowerPoint Show PPSX, 2.79 MB, 2 Minutes).
Article “How to Simulate and Optimise Debinding Processes” by Materials World magazine explains how the Kinetics Neo software helps perform polymer debinding processes more quickly and efficiently.
Application "Model-free analysis of Poplar fluff (Populus alba) pyrolysis process under dynamic (non-isothermal) conditions" (Nebojša Manić, Bojan Janković, University of Belgrade, Serbia). Detailed description and kinetic analysis of pyrolysis process by different isoconversional methods.
Application "Model-based analysis of Poplar fluff (Populus alba) pyrolysis process under dynamic (non-isothermal) conditions" (Nebojša Manić, Bojan Janković. University of Belgrade, Serbia). Kinetic analysis of pyrolysis process by model-based method and detailed research of each individual reaction step.
Optimized debinding and sintering process of HALFOAM ALUMINA by Morgan Advanced Materials Haldenwanger GmbH with the help of Kinetics Neo allows to save over 50% time in their firing process. Other articles about this project:
- Schaum-Keramik in Großserie (German);
Lecture on NATAS 2018: Kinetic Modelling and Optimization of Firing Process of Foam Ceramics.
Short introduction video (2 min) "Speed up Your Sintering Process with Kinetics Neo", April 2018.
Recorded webinar (57 min) "How to Optimize the Sintering of Ceramics", March 2019.
Recorded webinar (53 min) “Speed up your Sintering Process”, November 15, 2018.
Application: Nakamura Model for Polymer Crystallization Kinetics During Cooling (Dr. Elena Moukhina, Dr. Stefan Schmölzer, NETZSCH Gerätebau GmbH) contains the kinetic modelling of influence of cooling rate on the crystallization rate and final degree of crystallization of PET.
Webinar "Understanding the cure behavior with rheology kinetics" was held by Dr. Adrian Hill and Dr. Elena Moukhina. This webinar introduced the benefits of going beyond standard rheological analysis with using rheology data in Kinetics Neo.
NETZSCH Application Note AN-221 "Kinetic Analysis of the Shear Viscosity to Predict the Curing Behavior of a 2-Part Epoxy Adhesive" by Claire Strasser, Dr. Elena Moukhina and Torsten Remmler. Shear viscosity for the curing of a 2-part epoxy resin during heating was investigated by means of the Kinexus ultra+ with HTC. The rheological measurements with different heating rates were used to perfom the kinetic analysis of the viscosity data during the curing by means of Kinetics Neo.